Prediction of superhard carbon allotropes from the segment combination method

Many superhard allotropes of carbon have been proposed in recent years for the purpose of explaining the superhard carbon phases observed in the processes of cold compressing graphite and carbon nanotubes. In this paper, we have reviewed recent advances in searching for superhard phases of carbon from a segment combination view and found that they can be divided into two groups: (i) combinations of segments from cubic diamond and hexagonal diamond with 5-6-7 carbon rings and (ii) combinations of segments from hexagonal diamond and mutated hexagonal diamond with 4-6-8 carbon rings. Finally, an additional example of extending these allotropes of carbon to their corresponding boron nitride counterparts has been discussed.В останні роки було запропоновано безліч надтвердих алотропів вуглецю для пояснення його надтвердих фаз, які спостерігають в процесах холодного стиснення графіту і вуглецевих нанотрубок. У даній статті розглянуто останні досягнення в пошуках надтвердих фаз вуглецю з погляду методу комбінації структурних сегментів і виявлено, що вони можуть бути розділені на дві групи: 1) сполучення сегментів кубічного алмазу і гексагонального алмазу з 5-6-7-членними кільцями вуглецю і 2) сполучення сегментів гексагонального і мутованого гексагонального алмазу з 4-6-8-членними вуглецевими кільцями. Нарешті, розглядається відповідність алотропів вуглецю можливим структурам нітриду бору.В последние годы было предложены много сверхтвердых аллотропов углерода для объяснения его сверхтвердых фаз, наблюдаемых в процессах холодного сжатия графита и углеродных нанотрубок. В данной статье рассмотрены последние достижения в поиске сверхтвердых фаз углерода с точки зрения метода комбинации структурных сегментов и обнаружено, что они могут быть разделены на две группы: 1) сочетания сегментов кубического и гексагонального алмаза с 5-6-7-членными кольцами углерода и 2) сочетания сегментов гексагонального и мутированного гексагональног

Citation analysis of the scientific publications of Britton Chance in ISI citation indexes

Britton Chance was a pioneer in many scientific fields such as enzymatic reaction kinetics, bioenergetics, metabolism, in vivo NMR, and biophotonics. As an engineer, physical chemist, physicist, physiologist, biophysicist, biochemist, innovator and educator, he had worked in diversified fields over extended periods between 1926 until his death in 2010, at the age of 97. In order to illustrate his scientific career and great impact on research from a new perspective, we employ scientometric analysis tools to analyze the publications of Britton Chance with data downloaded from the ISI Citation Indexes in April 2013. We included articles, reviews and proceeding papers but excluded meeting abstracts. In total, we obtained 1023 publication records with 1236 authors in 266 journals with 17,114 citations from 1945 to 2013. We show the annual publications and citations that Britton Chance received from 1945 to 2013, and generate HistCite maps on the basis of the global citations (GCS) and local (self) citations (LCS) to show the citation relationships among the top-30 publications of Britton Chance. Metabolism and the development of physical methods to probe it appear to be the connecting thread of the lifelong research of Britton Chance. Furthermore, we generate the journal map and co-authorship map to show the broad scope of research topics and collaborators and the high impacts of the scientific oeuvre of Britton Chance ranging from physics, engineering, chemistry and biology to medicine

Research on the Assembly Pattern of MMC Bolted Flange Joint

AbstractIn a Metal-to-Metal Contact (MMC) bolted flange joint the stress of sealing surfaces is constant. It canwithstand higherbolt load. So, under the operating conditions of high temperature, high pressure or their fluctuations, the sealing effect of MMC bolted flange joints is better than of floating (FLT) bolted flange joints. According to the structure characteristics of MMC bolted flange joints, a new tightening method (SH-Method) was recommended in this work.The bolt forces during the tightening process of a MMC bolted flange joint with SH-Method were calculated and analyzed with the finite element analysis Software ANSYS. The calculating model and results were experimentally verified. Both calculating and experimentally results showed, the new tightening method ‘SH-Method’has the advantages of fewer steps, simpler operation, more uniform bolt force, and better sealing effect, compared to the star pattern and the alternative pattern #3 of ASME PCC-1, in which only the pattern methods for FLT flange joints are recommended

Patterned nanostructure in AgCo/Pt/MgO(001) thin film

The formation of patterned nanostructure in AgCo/Pt/MgO(001) thin film is simulated by a technique of combining molecular dynamics and phase-field theory. The dislocation (strain) network existing in Pt/MgO is used as a template whose pattern is transferred to AgCo phase in spinodal decomposition, resulting in regular arrays of Co islands that are attracted by the dislocations. The influence of various factors, such as component concentration and film thickness, is studied. It is found that the spinodal decomposition of AgCo in this system is mainly characterized by a competition between a surface-directed layer structure and the strain-induced patterned structure, where the patterned Ag-Co structure only dominates in a small range near the interface (less than 10 atomic layers). However, if the interlayer diffusion can be minimized by controlling film growth conditions, it is shown that the patterned structure can be formed throughout the entire film.Comment: 8 pages, 12 figure

Partial Wave Analysis of J/ψ→γ(K+K−π+π−)J/\psi \to \gamma (K^+K^-\pi^+\pi^-)

BES data on $J/\psi \to \gamma (K^+K^-\pi^+\pi^-)$ are presented. The $K^*\bar K^*$ contribution peaks strongly near threshold. It is fitted with a broad $0^{-+}$ resonance with mass $M = 1800 \pm 100$ MeV, width $\Gamma = 500 \pm 200$ MeV. A broad $2^{++}$ resonance peaking at 2020 MeV is also required with width $\sim 500$ MeV. There is further evidence for a $2^{-+}$ component peaking at 2.55 GeV. The non-$K^*\bar K^*$ contribution is close to phase space; it peaks at 2.6 GeV and is very different from $K^{*}\bar{K^{*}}$.Comment: 15 pages, 6 figures, 1 table, Submitted to PL

Associated production of neutral toppion with a pair of heavy quarks in γγ\gamma\gamma collisions

We have studied a neutral toppion production process $\gamma\gamma\to f\bar{f}\Pi_{t}^{0}(f=t,b)$ in the topcolor-assisted technicolor(TC2) model. We find that the cross section of $\gamma\gamma\to t\bar{t}\Pi_{t}^{0}$ is much larger than that of $\gamma\gamma\to b\bar{b}\Pi_{t}^{0}$. On the other hand, the cross section can be obviously enhanced with the increasing of c.m.energy. With $\sqrt{s}=1600$ GeV, the cross section of $t\bar{t}\Pi_t^0$ production can reach the level of a few fb. The results show that $\gamma\gamma\to t\bar{t}\Pi^0_t \to t\bar{t}(t\bar{c})$ is the most ideal channel to detect neutral toppion due to the clean SM background. With such sufficient signals and clean background, neutral toppion could be detected at TESLA with high c.m.energy.Comment: 11 pages, 5 figure

Measurement of W Polarisation at LEP

The three different helicity states of W bosons produced in the reaction e+ e- -> W+ W- -> l nu q q~ at LEP are studied using leptonic and hadronic W decays. Data at centre-of-mass energies \sqrt s = 183-209 GeV are used to measure the polarisation of W bosons, and its dependence on the W boson production angle. The fraction of longitudinally polarised W bosons is measured to be 0.218 \pm 0.027 \pm 0.016 where the first uncertainty is statistical and the second systematic, in agreement with the Standard Model expectation

Search for Anomalous Couplings in the Higgs Sector at LEP

Anomalous couplings of the Higgs boson are searched for through the processes e^+ e^- -> H gamma, e^+ e^- -> e^+ e^- H and e^+ e^- -> HZ. The mass range 70 GeV < m_H < 190 GeV is explored using 602 pb^-1 of integrated luminosity collected with the L3 detector at LEP at centre-of-mass energies sqrt(s)=189-209 GeV. The Higgs decay channels H -> ffbar, H -> gamma gamma, H -> Z\gamma and H -> WW^(*) are considered and no evidence is found for anomalous Higgs production or decay. Limits on the anomalous couplings d, db, Delta(g1z), Delta(kappa_gamma) and xi^2 are derived as well as limits on the H -> gamma gamma and H -> Z gamma decay rates

Measurement of W Polarisation at LEP

The three different helicity states of W bosons produced in the reaction e+ e- -> W+ W- -> l nu q q~ at LEP are studied using leptonic and hadronic W decays. Data at centre-of-mass energies \sqrt s = 183-209 GeV are used to measure the polarisation of W bosons, and its dependence on the W boson production angle. The fraction of longitudinally polarised W bosons is measured to be 0.218 \pm 0.027 \pm 0.016 where the first uncertainty is statistical and the second systematic, in agreement with the Standard Model expectation